Torna all'elenco della categoria: Diptronics
Versione stampabile del prodotto: DS(R), DA & DP(L) SERIES :: SPST Standard Type

DS(R), DA & DP(L) SERIES
SPST Standard Type

Pag: 1 - 2
ATECO
Diptronics

 
SPECIFICATION

Mechanical

  • Mechanical Life: 2000 operations per switch.
  • Operation Force: 400 gf max. (DP series) 1000 gf max. (DS & DA series)
  • Stroke: 2.0 mm
  • Operation Temp: -20 °C to 70 °C
  • Storage Temp: -40 °C to 85 °C
  • Vibration Test: MIL-STD-202F METHOD 201A.
    Frequency: 10-55-10Hz/1 min.
    Directions: X, Y, Z, three mutually perpendicular directions.
    Time: 2 hours each direction.
    High reliability.
  • Shock Test: MIL-STD-202F Method 213 B.
    CONDITION A.
    Gravity: 50G (peak value), 11 msec.
    Direction and times: 6 sides and 3 Times in each direction.
    High reliability.

Electrical

  • Electrical Life: 2000 operations per switch 24VDC, 25 mA.
  • Non-switching Rating: 100 mA, 50VDC.
  • Switching rating: 25 mA, 24VDC.
  • Contact Resistance: 50 mΩ max. at initial.
  • Insulation Resistance: (at 500 VDC) 100 MΩ min.
  • Dielectric Strength 500VAC/1 minute.
  • Capacitance: 5 pF max.
  • Circuit Single pole single throw.


SOLDERING PROCESSES

For best results, please follow these recommendations:

  • Keep all switch contacts in their "OFF" position for all operations.
  • Wave soldering: Recommended solder 260 °C 5 seconds.
  • Hand soldering: Use a soldering iron of 30 Watts or less, controlled at 350 °C approximately 5 seconds while applying solder.
  • Do not clean the switch body except top tape sealed type, which only suitable for spray cleaning method from top of the S/W.
  • Make sure switch is in "OFF" position during soldering process, or it will decrease the operating force and meanwhile increase the contact resistance.
MODELS

DS-12
DSR-12
DA-12 DP-12
DPL-12
12 32.04(1.261) 31.84(1.254)
DS-10
DSR-10
DA-10 DP-10
DPL-10
10 26.96(1.061) 26.76(1.054)
DS-09
DSR-09
DA-09 DP-09
DPL-09
9 24.42(.961) 24.22(.954)
DS-08
DSR-08
DA-08 DP-08
DPL-08
8 21.88(.861) 21.68(.854)
DS-07
DSR-07
DA-07 DP-07
DPL-07
7 19.34(.761) 19.14(.754)
DS-06
DSR-06
DA-06 DP-06
DPL-06
6 16.80(.661) 16.60(.654)
DS-05
DSR-05
DA-05 DP-05
DPL-05
5 14.26(.561) 14.06(.554)
DS-04
DSR-04
DA-04 DP-04
DPL-04
4 11.72(.461) 11.52(.454)
DS-03
DSR-03
DA-03 DP-03
DPL-03
3 9.18(.361) 8.98(.354)
DS-02
DSR-02
DA-02 DP-02
DPL-02
2 6.64(.261) 6.44(.254)
Prod. No.     No.Of pos. Dim.A
(DP.DPL)
Dim.B
(DS.DSR.DA)

DS(R), DA & DP(L) SERIES :: SPST Standard Type - Image 1


HOW TO ORDER
DS(R), DA & DP(L) SERIES :: SPST Standard Type - Image 2

Pag: 1 - 2