DTSA (RIGHT ANGLE) & DTSG
(GROUND TERMINAL) SERIES
(Square STEM with CAP Options)

Pag: 1 - 2

Diptronics

Operation Force: 520 ± 130gf Yellow (Y)
320 ± 80gf Salmon (S)
260 ± 50gf Red (R)
160 ± 50gf Brown (N)
100 ± 50gf Black (K)
Stop Strength: Max 3kgf vertica static load continuously for 15 seconds
Stroke: (6x6) 0.25+0.2mm -0.1mm
(12x12) 0.35±0.1mm
Operation Temperature Range: -25 °C to 70 °C
Storage Temperature Range: -30 °C to 80 °C
Vibration Test: MIL-STD-202F METHOD 201A.
Frequency: 10-55-10Hz/1 min.
Directions: X, Y, Z, three mutually perpendicular directions.
Time: 2 hours each direction.
High reliability.
Shock Test: MIL-STD-202F METHOD 213 B.
CONDITION A.
Gravity: 50G (peak value), 11 msec.
Direction and times: 6 sides and 3 times in each direction.
High reliability.

Electrical Life (6x6): 300,000 cycles for 320gf, 520gf.
500,000 cycles for 260gf.
1,000,000 cycles for 100gf, 160gf.
Electrical Life (12x12): 100,000 cycles for 320gf.
100,000 cycles for 260gf.
200,000 cycles for 160gf.
Rating: 50 mA, 12VDC.
Contact Resistance: 100 mΩ max.
Insulation Resistance: 100 MΩ min. 500VDC.
Dielectric Strength: 250VAC/1 minute.
Contact Arrangement: 1 pole 1 throw.

Wave soldering: Recommended solder temperature at 500 °F (260 °C) max. 5 seconds subject to PCB 1.6mm thickness. (For through hole type).
Hand soldering: Use a soldering iron of 30 watts, controlled at 350 °C approximately 5 seconds while applying solder.