DTS(G)L-6 & DTSGF-6 SERIES
Thinner Type (With Ground Terminal
Option)

SPECIFICATION

Mechanical

• Operation Force: 520 ± 130gf Yellow (Y)
                      320 ± 80gf Salmon (S)
                      260 ± 50gf Red (R)
                      160 ± 50gf Brown (N)
                      100 ± 50gf Black (K)
                     

  200

  +60 -50

  gf Brown (N)

• Stroke: (6x6) 0.25 +0.2mm
                      -0.1mm
  
  
• Operation Temperature Range: -25 °C to 70 °C
• Storage Temperature Range: -30 °C to 80 °C
• Vibration Test: MIL-STD-202F METHOD 201A.
  Frequency: 10-55-10Hz/1 min.
  Directions: X, Y, Z, three mutually perpendicular directions.
            Time: 2 hours each direction.
            High reliability.
• Shock Test: MIL-STD-202F METHOD 213 B.
            CONDITION A.
            Gravity: 50G (peak value), 11 msec.
            Direction and times: 6 sides and 3 times
            in each direction.
            High reliability.

Electrical

• Electrical Life: 100,000 cycles for 320gf, 520gf.
            100,000 cycles for 260gf.
            200,000 cycles for 100gf, 160gf, 180gf.
• Rating: 50 mA, 12VDC.
• Contact Resistance: 100 mΩ max.
• Insulation Resistance: 100 MΩ min. 500VDC.
• Dielectric Strength: 250VAC/1 minute.
• Contact Arrangement: 1 pole 1 throw.

SOLDERING PROCESSES

• Hand soldering: Use a soldering iron of 30 watts, controlled at 350 °C approximately 5 seconds while applying solder.
• Reflow soldering: When applying reflow soldering, the peak temperature or the reflow Oven should be set to 260 °C max.
  Condition for soldering.
  (Reflow & Non-washable type)

Temperature Profile:

HOW TO ORDER

CIRCUIT

P.C.B. LAYOUT

PACKAGING