SPECIFICATION
Mechanical
- Mechanical Life: 2000 operations per switch.
- Operation Force: 1000 gf max.
- Stroke: 1.0 mm
- Operation Temp: -20 °C to 85 °C
- Storage Temp: -40 °C to 85 °C
- Vibration Test: MIL-STD-202F METHOD 201A.
Frequency: 10-55-10Hz/1 min.
Directions: X, Y, Z, three mutually perpendicular directions.
Time: 2 hours each direction.
High reliability.
- Shock Test: MIL-STD-202F Method 213 B.
CONDITION A.
Gravity: 50G (peak value), 11 msec.
Direction and times: 6 sides and 3 Times in each direction.
High reliability.
Electrical
- Electrical Life: 2000 operations per switch 24VDC, 25 mA.
- Non-switching Rating: 100 mA, 50VDC.
- Switching rating: 25 mA, 24VDC.
- Contact Resistance: (a) 50 mΩ max. at initial.
(b) 100 mΩ max. after life test.
- Insulation Resistance: (at 500 VDC) 100 MΩ min.
- Dielectric Strength 500VAC/1 minute.
- Capacitance: 5 pF max.
- Circuit Single pole single throw.
SOLDERING PROCESSES
For best results, please follow these recommendations:
- Keep all switch contacts in their "OFF" position for all operations.
- Wave soldering: Recommended solder temperature at 500 °F (260 °C) max 5 seconds for through hole type.
- Hand soldering: Use a soldering iron of 30 Watts, controlled at 350 °C approximately 5 seconds while applying.
- Reflowe soldering: When applying reflow soldering, the peak temperature of the reflow oven should be set to 260 °C.
- Any flux enters the switch may fail the conductivity.
- Do not clean the switch body except top tape sealed type, which only suitable for spray cleaning method from top of the S/W.
Temperature profile
|
MODELS
DJ-12
DJR-12 |
DM-12
DMR-12 |
NDI-12
NDIR-12 |
DL-12
DLR-12 |
12 |
31.42 (1.237) |
27.94 (1.100) |
DJ-10
DJR-10 |
DM-10
DMR-10 |
NDI-10
NDIR-10 |
DL-10
DLR-10 |
10 |
26.34 (1.037) |
22.86 (.900) |
DJ-09
DJR-09 |
DM-09
DMR-09 |
NDI-09
NDIR-09 |
DL-09
DLR-09 |
9 |
23.80 (.0937) |
20.32 (.800) |
DJ-08
DJR-08 |
DM-08
DMR-08 |
NDI-08
NDIR-08 |
DL-08
DLR-08 |
8 |
21.26 (.837) |
17.78 (.700) |
DJ-07
DJR-07 |
DM-07
DMR-07 |
NDI-07
NDIR-07 |
DL-07
DLR-07 |
7 |
18.72 (.737) |
15.24 (.600) |
DJ-06
DJR-06 |
DM-06
DMR-06 |
NDI-06
NDIR-06 |
DL-06
DLR-06 |
6 |
16.18 (.637) |
12.70 (.500) |
DJ-05
DJR-05 |
DM-05
DMR-05 |
NDI-05
NDIR-05 |
DL-05
DLR-05 |
5 |
13.64 (.537) |
10.16 (.400) |
DJ-04
DJR-04 |
DM-04
DMR-04 |
NDI-04
NDIR-04 |
DL-04
DLR-04 |
4 |
11.10 (.437) |
7.62 (.300) |
DJ-03
DJR-03 |
DM-03
DMR-03 |
NDI-03
NDIR-03 |
DL-03
DLR-03 |
3 |
8.56 (.337) |
5.08 (.200) |
DJ-02
DJR-02 |
DM-02
DMR-02 |
NDI-02
NDIR-02 |
DL-02
DLR-02 |
2 |
6.02 (.237) |
2.54 (.100) |
| |
DM-01
DMR-01 |
NDI-01
NDIR-01 |
DL-01
DLR-01 |
1 |
3.48 (.137) |
...... |
| Prod. No. |
No.Of pos. |
Dim.A |
Dim.B |
HOW TO ORDER
PACKING
All DIP switches are shipped in standard IC tubes or in Tape & Reel Package with all poles in the "OFF" position.
|
