SPECIFICATION
Mechanical
- Mechanical Life: 2000 operations.
- Operation Force: 1000 gf max.
- Stroke: 0.8 mm.
- Operation Temp: -20 °C to 85 °C
- Storage Temp: -40 °C to 85 °C
- Vibration Test: MIL-STD-202F METHOD 201A.
Frequency: 10-55-10Hz/1 min.
Directions: X, Y, Z, three mutually perpendicular directions.
Time: 2 hours each direction.
High reliability.
- Shock Test: MIL-STD-202F Method 213 B.
CONDITION A.
Gravity: 50G (peak value), 11 msec.
Direction and times: 6 sides and 3 Times in each direction.
High reliability.
Electrical
- Electrical Life: 2,000 cycles.
- Non-switching Rating: 100 mA, 50VDC.
- Rating: 25 mA, 24VDC.
- Contact Resistance: a) 50 mΩ max. at initial
b) 100 mΩ max. after life test.
- Insulation Resistance: 100 mΩ max. at 500 VDC.
- Dielectric Strength 500VAC/1 minute.
- Circuit: 3 switching positions.
SOLDERING PROCESSES
For best results, please follow these recommendations:
- Keep all switch contacts in their "OFF" position for all operations.
- Wave soldering: Recommended solder temperature at 500 °F
(260 °C) max 5 seconds for through hole type.
- Hand soldering: Use a soldering iron of 30 Watts, controlled at 350 °C approximately 5 seconds while applying.
- Reflow soldering: When applying reflow soldering, the peak temperature of the reflow oven should be set to 260 °C max.
- Any flux enters the switch may fail the conductivity.
- Do not wash the switch body except top tape sealed type, which only suitable for spray of cleaning method from top of the S/W.
Temperature profile
|
HOW TO ORDER
P.C.B LAYOUT
|
