GS1A - GS1M
Pag: 1 - 2
Max Diode Electronic
Surface mount rectifier
Voltage: 50 to 1.000 Volts
Current: 1.0 Amperes
Features
- For surface mounted applications
- Low profile package
- Built-in strain relief
- Easy pick and place
- Plastic package has Underwriters Laboratory Flammability
Classification 94V-O - Low Forward Drop
- High temperature soldering: 260 °C/10 seconds at terminals
- Glass Passivated Chip Junction
- Pb free product available: 99% Sn above can meet RoHS
environment substance directive request
Mechanical data
- Case: JEDEC DO-214AC molded plastic
- Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
- Polarity: Indicated by cathode band
- Standard packaging: 12 mm tape (EIA-481)
- Weight: 0.002 ounces, 0.064 gram
Maximum Ratings and Electrical Characteristics
- Ratings at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
| Symbols | GS1A | GS1B | GS1D | GS1G | GS1J | GS1K | GS1M | Units | |
| Maximum Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1.000 | Volts |
| Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
| Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1.000 | Volts |
| Maximum Average Forward Rectified Current, at TL = 100°C |
I(AV) | 1.0 | Amps | ||||||
| Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM | 30 | Amps | ||||||
| Maximum Forward Voltage at 1.0A |
VF | 1.1 | Volts | ||||||
| Maximum DC Reverse Current TA = 25°C at Rated DC Blocking Voltage TA = 125°C |
IR | 5.0 200 |
µA | ||||||
| Typical Junction Capacitance (NOTE 1) | CJ | 15 | pf | ||||||
| Typical Junction Resistance (NOTE 2) | R θ JL | 30 | °C/W | ||||||
| Operating and Storage Temperature Range | TJ, TSTG | -65 to +175 | °C | ||||||
Notes:
1. Measured at 1 MHz and Applied Vr = 4.0 Volts.
3.8 .0 mm2 (.013 mm thick) land areas.
Pag: 1 - 2