S3A - S3M
Pag: 1 - 2

Max Diode Electronic

Surface mount rectifier
Voltage: 50 to 1.000 Volts
Current: 3.0 Amperes
Features
- For surface mounted applications
- Low profile package
- Built-in strain relief
- Easy pick and place
- Plastic package has Underwriters Laboratory Flammability
Classification 94V-O - Glass Passivated Chip Junction
Mechanical data
- Case: JEDEC DO-214AB molded plastic
- Terminals: Solder plated, solderable per MIL-STD-750, Method 2006
- Polarity: Indicated by cathode band
- Standard packaging: 16 mm tape (EIA-481)
- Weight: 0.007 ounces, 0.21 gram
Maximum Ratings and Electrical Characteristics
- Ratings at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
Symbols | S3A | S3B | S3D | S3G | S3J | S3K | S3M | Units | |
Maximum Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1.000 | Volts |
Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1.000 | Volts |
Maximum Average Forward Rectified Current, at TL = 75°C |
I(AV) | 3.0 | Amps | ||||||
Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM | 100.0 | Amps | ||||||
Maximum instantaneous Forward Voltage at 3.0A |
VF | 1.20 | Volts | ||||||
Maximum DC Reverse Current TA = 25°C at Rated DC Blocking Voltage TA = 125°C |
IR | 5.0 250.0 |
µA | ||||||
Typical Reverse Recovery Time (NOTE 1) | TRR | 2.5 | µS | ||||||
Typical Junction Capacitance (NOTE 2) | CJ | 60.0 | pf | ||||||
Maximum Thermal Resistance (NOTE 3) | R θ JL R θ JA |
13 47 |
°C/W | ||||||
Operating and Storage Temperature Range | TJ, TSTG | -65 to + 150 | °C |
Notes:
1. Reverse Recovery test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and Applied Vr = 4.0 Volts.
3. 8.0 mm2 (.013 mm thick) land areas.
Pag: 1 - 2